--- /dev/null
+/*
+ * The Clear BSD License
+ * Copyright (c) 2015, Freescale Semiconductor, Inc.
+ * Copyright 2016 - 2018 NXP
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted (subject to the limitations in the disclaimer below) provided
+ * that the following conditions are met:
+ *
+ * o Redistributions of source code must retain the above copyright notice, this list
+ * of conditions and the following disclaimer.
+ *
+ * o Redistributions in binary form must reproduce the above copyright notice, this
+ * list of conditions and the following disclaimer in the documentation and/or
+ * other materials provided with the distribution.
+ *
+ * o Neither the name of the copyright holder nor the names of its
+ * contributors may be used to endorse or promote products derived from this
+ * software without specific prior written permission.
+ *
+ * NO EXPRESS OR IMPLIED LICENSES TO ANY PARTY'S PATENT RIGHTS ARE GRANTED BY THIS LICENSE.
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _USB_DEVICE_CONFIG_H_
+#define _USB_DEVICE_CONFIG_H_
+
+/*******************************************************************************
+* Definitions
+******************************************************************************/
+/*!
+ * @name Hardware instance define
+ * @{
+ */
+
+/*! @brief KHCI instance count */
+#define USB_DEVICE_CONFIG_KHCI (1U)
+
+/*! @brief EHCI instance count */
+#define USB_DEVICE_CONFIG_EHCI (0U)
+
+/*! @brief LPC USB IP3511 FS instance count */
+#define USB_DEVICE_CONFIG_LPCIP3511FS (0U)
+
+/*! @brief LPC USB IP3511 HS instance count */
+#define USB_DEVICE_CONFIG_LPCIP3511HS (0U)
+
+/*! @brief Device instance count, the sum of KHCI and EHCI instance counts*/
+#define USB_DEVICE_CONFIG_NUM \
+ (USB_DEVICE_CONFIG_KHCI + USB_DEVICE_CONFIG_EHCI + USB_DEVICE_CONFIG_LPCIP3511FS + USB_DEVICE_CONFIG_LPCIP3511HS)
+
+/* @} */
+
+/*!
+ * @addtogroup usb_device_configuration
+ * @{
+ */
+
+/*!
+ * @name class instance define
+ * @{
+ */
+
+/*! @brief HID instance count */
+#define USB_DEVICE_CONFIG_HID (0U)
+
+/*! @brief CDC ACM instance count */
+#define USB_DEVICE_CONFIG_CDC_ACM (1U)
+
+/*! @brief MSC instance count */
+#define USB_DEVICE_CONFIG_MSC (0U)
+
+/*! @brief Audio instance count */
+#define USB_DEVICE_CONFIG_AUDIO (0U)
+
+/*! @brief PHDC instance count */
+#define USB_DEVICE_CONFIG_PHDC (0U)
+
+/*! @brief Video instance count */
+#define USB_DEVICE_CONFIG_VIDEO (0U)
+
+/*! @brief CCID instance count */
+#define USB_DEVICE_CONFIG_CCID (0U)
+
+/*! @brief Printer instance count */
+#define USB_DEVICE_CONFIG_PRINTER (0U)
+
+/*! @brief DFU instance count */
+#define USB_DEVICE_CONFIG_DFU (0U)
+
+/* @} */
+
+/*! @brief Whether device is self power. 1U supported, 0U not supported */
+#define USB_DEVICE_CONFIG_SELF_POWER (1U)
+
+/*! @brief How many endpoints are supported in the stack. */
+#define USB_DEVICE_CONFIG_ENDPOINTS (4U)
+
+/*! @brief Whether the device task is enabled. */
+#define USB_DEVICE_CONFIG_USE_TASK (0U)
+
+/*! @brief How many the notification message are supported when the device task is enabled. */
+#define USB_DEVICE_CONFIG_MAX_MESSAGES (8U)
+
+/*! @brief Whether test mode enabled. */
+#define USB_DEVICE_CONFIG_USB20_TEST_MODE (0U)
+
+/*! @brief Whether device CV test is enabled. */
+#define USB_DEVICE_CONFIG_CV_TEST (0U)
+
+/*! @brief Whether device compliance test is enabled. If the macro is enabled,
+ the test mode and CV test macroes will be set.*/
+#define USB_DEVICE_CONFIG_COMPLIANCE_TEST (0U)
+
+#if ((defined(USB_DEVICE_CONFIG_COMPLIANCE_TEST)) && (USB_DEVICE_CONFIG_COMPLIANCE_TEST > 0U))
+
+/*! @brief Undefine the marco USB_DEVICE_CONFIG_USB20_TEST_MODE. */
+#undef USB_DEVICE_CONFIG_USB20_TEST_MODE
+/*! @brief Undefine the marco USB_DEVICE_CONFIG_CV_TEST. */
+#undef USB_DEVICE_CONFIG_CV_TEST
+
+/*! @brief enable the test mode. */
+#define USB_DEVICE_CONFIG_USB20_TEST_MODE (1U)
+
+/*! @brief enable the CV test */
+#define USB_DEVICE_CONFIG_CV_TEST (1U)
+
+#endif
+
+#if ((defined(USB_DEVICE_CONFIG_KHCI)) && (USB_DEVICE_CONFIG_KHCI > 0U))
+
+/*! @brief The MAX buffer length for the KHCI DMA workaround.*/
+#define USB_DEVICE_CONFIG_KHCI_DMA_ALIGN_BUFFER_LENGTH (64U)
+#endif
+
+#if ((defined(USB_DEVICE_CONFIG_EHCI)) && (USB_DEVICE_CONFIG_EHCI > 0U))
+/*! @brief How many the DTD are supported. */
+#define USB_DEVICE_CONFIG_EHCI_MAX_DTD (16U)
+
+/*! @brief Whether the EHCI ID pin detect feature enabled. */
+#define USB_DEVICE_CONFIG_EHCI_ID_PIN_DETECT (0U)
+#endif
+
+/*! @brief Whether the keep alive feature enabled. */
+#define USB_DEVICE_CONFIG_KEEP_ALIVE_MODE (0U)
+
+/*! @brief Whether the transfer buffer is cache-enabled or not. */
+#ifndef USB_DEVICE_CONFIG_BUFFER_PROPERTY_CACHEABLE
+#define USB_DEVICE_CONFIG_BUFFER_PROPERTY_CACHEABLE (0U)
+#endif
+/*! @brief Whether the low power mode is enabled or not. */
+#define USB_DEVICE_CONFIG_LOW_POWER_MODE (0U)
+
+#if ((defined(USB_DEVICE_CONFIG_LOW_POWER_MODE)) && (USB_DEVICE_CONFIG_LOW_POWER_MODE > 0U))
+/*! @brief Whether device remote wakeup supported. 1U supported, 0U not supported */
+#define USB_DEVICE_CONFIG_REMOTE_WAKEUP (0U)
+
+/*! @brief Whether LPM is supported. 1U supported, 0U not supported */
+#define USB_DEVICE_CONFIG_LPM_L1 (0U)
+#else
+/*! @brief The device remote wakeup is unsupported. */
+#define USB_DEVICE_CONFIG_REMOTE_WAKEUP (0U)
+#endif
+
+/*! @brief Whether the device detached feature is enabled or not. */
+#define USB_DEVICE_CONFIG_DETACH_ENABLE (0U)
+
+/*! @brief Whether handle the USB bus error. */
+#define USB_DEVICE_CONFIG_ERROR_HANDLING (0U)
+
+/* @} */
+
+#endif /* _USB_DEVICE_CONFIG_H_ */
projects / gps-watch.git / blobdiff