X-Git-Url: http://git.code-monkey.de/?p=pulseview.git;a=blobdiff_plain;f=manual%2Fdecoders.txt;fp=manual%2Fdecoders.txt;h=aef3034b2f88cccf65b286ececde727b34258de9;hp=0000000000000000000000000000000000000000;hb=1894027b98640702a5229c4168c586df5f83a3af;hpb=39e047cffdbfdb6dd10f3367e600887553a89d74

diff --git a/manual/decoders.txt b/manual/decoders.txt
new file mode 100644
index 0000000..aef3034
--- /dev/null
+++ b/manual/decoders.txt
@@ -0,0 +1,104 @@
+== Decoders
+
+Protocol decoders are one of the key elements of PulseView's functionality. They take
+input data that you acquired and process it in a way that results in a (hopefully) much
+easier to understand representation of that same data.
+
+In its simplest form, a protocol decoder (PD) converts a group of 1-bit signals into a
+stream of n-bit events. This is exactly what the parallel PD does: it takes for example
+8 logic channels and treats them like an 8-bit parallel bus, emitting annotations that
+show the current state of the bus at any point in time.
+
+=== Basic Operation
+
+Another one of the protocol decoders available to you is the I²C decoder. It takes the
+two I²C signals SCL and SDA (serial clock / serial data) and shows you the details of
+the I²C communication without the need to evaluate the signal bit by bit yourself.
+
+As an example, let's have look at one of the sample .sr files we keep around for
+validation of the PD code base: https://sigrok.org/gitweb/?p=sigrok-dumps.git;a=blob_plain;f=i2c/rtc_dallas_ds1307/rtc_ds1307_200khz.sr;hb=HEAD[rtc_ds1307_200khz.sr].
+It contains the capture of an I²C master interacting with a https://www.maximintegrated.com/en/products/digital/real-time-clocks/DS1307.html[Dallas DS1307 I²C Real-Time Clock]
+where the master repeatedly sets and queries the time of day. After loading and using
+"zoom-to-fit", it looks similar to this:
+
+image::pv_decoders_1.png[]
+
+Adding the I²C decoder by clicking on ➊ and selecting I²C from the list adds
+a new decode signal to the view. PulseView tries to match existing signals to the signals
+that the newly added protocol decoder needs to function, which is what happened here -
+SCL and SDA have been automatically assigned and the PD has decoded the communication with
+the default parameters. If you need to change the signal assignment or change the decoding
+parameters, you can click on ➋ to do so.
+
+When you zoom in, you now see that PulseView has decoded the I²C messages and displays
+these annotations as part of the decode signal (note that we have zoomed in so far that
+PulseView shows you the individual samples):
+
+image::pv_decoders_2.png[]
+
+This is already very useful, and a massive improvement over counting out pulses on an
+oscilloscope screen. However, sigrok allows us to go one step further with the use of
+so-called stacked decoders. 
+
+=== Decoder Stacking
+
+To add a stacked decoder we open the settings of the decode signal, go to the _Stack
+Decoder_ menu ➊, and select the DS1307 decoder:
+
+image::pv_decoders_3.png[]
+
+With the stacked decoder added, we can now see that PulseView has decoded the meaning
+of the I²C commands, so that we don't need to bother searching the reference manual.
+In this view, we can see that the I²C packet was a command to read the date and time,
+which was then reported to be 10.03.2013 23:35:30. 
+
+There are all kinds of stacked decoders available, but keep in mind that they're not
+shown in the decoder menu. Stacked decoders require a lower-level decoder first before
+they become stackable. Most of the time, they require either the UART, I²C or SPI decoder.
+
+You can check the https://sigrok.org/wiki/Protocol_decoders[List of Protocol Decoders]
+to see which protocol decoders have been created already.
+
+=== Using Decoders on Analog Signals
+
+If you're capturing data using an oscilloscope or import analog signal data from a file,
+you'll quickly notice that protocol decoders don't give you the option to select analog
+channels as inputs. That is because as of now, decoders only work on logic signals. You
+can however convert analog signals into logic signals by choosing a conversion setting
+from the signal setting popup.
+
+image::pv_conversion_a2l.png[]
+
+Here, A1 has been converted using a threshold (with default settings) and A2 has been
+converted using a Schmitt-Trigger emulation (also with default settings). Additionally,
+the conversion threshold display mode has been set to _Background_ in the _Views_ settings
+dialog. This way, you can tell how PulseView decided to change the logic signal level
+as you can now visually understand where the ranges for high and low are placed.
+
+Aside from the default conversion threshold(s), you can choose from a few common presets
+or enter custom values as well. They take the form "0.0V" and "0.0V/0.0V", respectively.
+
+=== Exporting Annotations
+
+If you want to postprocess annotations that were generated by a protocol decoder, you
+can do so by right-clicking into the area of the decode signal (not on the signal label
+on the left). You are shown several export methods to choose from, with the last one
+being only available if the cursor is enabled.
+
+After you chose a method that suits your needs, you are prompted for a file to export
+the annotations to. The contents of the file very much depend on the option you chose
+but also on the annotation export format string that you can define in the _Decoders_
+menu of the settings dialog. If the default output isn't useful to you, you can
+customize it there.
+
+=== Creating a Protocol Decoder
+
+Protocol decoders are written in Python and can be created using nothing more than a
+text editor. You, too, can write one!
+
+To find out how to go about it, please see our https://sigrok.org/wiki/Protocol_decoder_HOWTO[Protocol Decoder How-To]
+and the https://sigrok.org/wiki/Protocol_decoder_API[Protocol Decoder API Reference].
+
+If you do write one, we'd appreciate if you'd contribute to our project so that everyone
+can benefit from your work.
+