#include "logicsignal.hpp"
#include "view.hpp"
+#include "pv/util.hpp"
#include "pv/data/analog.hpp"
#include "pv/data/analogsegment.hpp"
#include "pv/data/logic.hpp"
using std::deque;
using std::div;
using std::div_t;
+// Note that "using std::isnan;" is _not_ put here since that would break
+// compilation on some platforms. Use "std::isnan()" instead in checks below.
using std::max;
using std::make_pair;
using std::min;
using std::shared_ptr;
using std::vector;
+using pv::data::LogicSegment;
using pv::data::SignalBase;
+using pv::util::SIPrefix;
namespace pv {
namespace views {
namespace trace {
-const QColor AnalogSignal::SignalColours[4] = {
+const QColor AnalogSignal::SignalColors[4] = {
QColor(0xC4, 0xA0, 0x00), // Yellow
QColor(0x87, 0x20, 0x7A), // Magenta
QColor(0x20, 0x4A, 0x87), // Blue
const QColor AnalogSignal::GridMajorColor = QColor(0, 0, 0, 40 * 256 / 100);
const QColor AnalogSignal::GridMinorColor = QColor(0, 0, 0, 20 * 256 / 100);
-const QColor AnalogSignal::SamplingPointColour(0x77, 0x77, 0x77);
-const QColor AnalogSignal::SamplingPointColourLo = QColor(200, 0, 0, 80 * 256 / 100);
-const QColor AnalogSignal::SamplingPointColourNe = QColor(0, 0, 0, 80 * 256 / 100);
-const QColor AnalogSignal::SamplingPointColourHi = QColor(0, 200, 0, 80 * 256 / 100);
+const QColor AnalogSignal::SamplingPointColor(0x77, 0x77, 0x77);
+const QColor AnalogSignal::SamplingPointColorLo = QColor(200, 0, 0, 80 * 256 / 100);
+const QColor AnalogSignal::SamplingPointColorNe = QColor(0, 0, 0, 80 * 256 / 100);
+const QColor AnalogSignal::SamplingPointColorHi = QColor(0, 200, 0, 80 * 256 / 100);
const QColor AnalogSignal::ThresholdColor = QColor(0, 0, 0, 30 * 256 / 100);
const QColor AnalogSignal::ThresholdColorLo = QColor(255, 0, 0, 8 * 256 / 100);
shared_ptr<data::SignalBase> base) :
Signal(session, base),
scale_index_(4), // 20 per div
- scale_index_drag_offset_(0),
pos_vdivs_(1),
neg_vdivs_(1),
resolution_(0),
display_type_(DisplayBoth),
- autoranging_(true)
+ autoranging_(true),
+ value_at_hover_pos_(std::numeric_limits<float>::quiet_NaN())
{
axis_pen_ = AxisPen;
connect(analog_data, SIGNAL(min_max_changed(float, float)),
this, SLOT(on_min_max_changed(float, float)));
- GlobalSettings::add_change_handler(this);
-
- GlobalSettings gs;
+ GlobalSettings settings;
+ show_sampling_points_ =
+ settings.value(GlobalSettings::Key_View_ShowSamplingPoints).toBool();
+ fill_high_areas_ =
+ settings.value(GlobalSettings::Key_View_FillSignalHighAreas).toBool();
+ high_fill_color_ = QColor::fromRgba(settings.value(
+ GlobalSettings::Key_View_FillSignalHighAreaColor).value<uint32_t>());
+ show_analog_minor_grid_ =
+ settings.value(GlobalSettings::Key_View_ShowAnalogMinorGrid).toBool();
conversion_threshold_disp_mode_ =
- gs.value(GlobalSettings::Key_View_ConversionThresholdDispMode).toInt();
-
- div_height_ = gs.value(GlobalSettings::Key_View_DefaultDivHeight).toInt();
+ settings.value(GlobalSettings::Key_View_ConversionThresholdDispMode).toInt();
+ div_height_ = settings.value(GlobalSettings::Key_View_DefaultDivHeight).toInt();
- base_->set_colour(SignalColours[base_->index() % countof(SignalColours)]);
+ base_->set_color(SignalColors[base_->index() % countof(SignalColors)]);
update_scale();
}
-AnalogSignal::~AnalogSignal()
-{
- GlobalSettings::remove_change_handler(this);
-}
-
shared_ptr<pv::data::SignalData> AnalogSignal::data() const
{
return base_->analog_data();
return make_pair(-ph, nh);
}
-int AnalogSignal::scale_handle_offset() const
-{
- const int h = (pos_vdivs_ + neg_vdivs_) * div_height_;
-
- return ((scale_index_drag_offset_ - scale_index_) * h / 4) - h / 2;
-}
-
-void AnalogSignal::scale_handle_dragged(int offset)
-{
- const int h = (pos_vdivs_ + neg_vdivs_) * div_height_;
-
- scale_index_ = scale_index_drag_offset_ - (offset + h / 2) / (h / 4);
-
- update_scale();
-}
-
-void AnalogSignal::scale_handle_drag_release()
-{
- scale_index_drag_offset_ = scale_index_;
- update_scale();
-}
-
-void AnalogSignal::on_setting_changed(const QString &key, const QVariant &value)
-{
- if (key == GlobalSettings::Key_View_ConversionThresholdDispMode)
- on_settingViewConversionThresholdDispMode_changed(value);
-}
-
void AnalogSignal::paint_back(QPainter &p, ViewItemPaintParams &pp)
{
if (!base_->enabled())
paint_axis(p, pp, get_visual_y());
} else {
- Trace::paint_back(p, pp);
+ Signal::paint_back(p, pp);
paint_axis(p, pp, get_visual_y());
}
}
paint_grid(p, y, pp.left(), pp.right());
shared_ptr<pv::data::AnalogSegment> segment = get_analog_segment_to_paint();
- if (!segment)
+ if (!segment || (segment->get_sample_count() == 0))
return;
const double pixels_offset = pp.pixels_offset();
(int64_t)0), last_sample);
if (samples_per_pixel < EnvelopeThreshold)
- paint_trace(p, segment, y, pp.left(),
- start_sample, end_sample,
+ paint_trace(p, segment, y, pp.left(), start_sample, end_sample,
pixels_offset, samples_per_pixel);
else
- paint_envelope(p, segment, y, pp.left(),
- start_sample, end_sample,
+ paint_envelope(p, segment, y, pp.left(), start_sample, end_sample,
pixels_offset, samples_per_pixel);
}
if ((display_type_ == DisplayAnalog) || (display_type_ == DisplayBoth)) {
const int y = get_visual_y();
- // Show the info section on the right side of the trace
- const QString infotext = QString("%1 V/div").arg(resolution_);
+ QString infotext;
- p.setPen(base_->colour());
+ // Show the info section on the right side of the trace, including
+ // the value at the hover point when the hover marker is enabled
+ // and we have corresponding data available
+ if (show_hover_marker_ && !std::isnan(value_at_hover_pos_)) {
+ infotext = QString("[%1] %2 V/div")
+ .arg(format_value_si(value_at_hover_pos_, SIPrefix::unspecified, 2, "V", false))
+ .arg(resolution_);
+ } else
+ infotext = QString("%1 V/div").arg(resolution_);
+
+ p.setPen(base_->color());
p.setFont(QApplication::font());
const QRectF bounding_rect = QRectF(pp.left(),
p.drawText(bounding_rect, Qt::AlignRight | Qt::AlignBottom, infotext);
}
+
+ if (show_hover_marker_)
+ paint_hover_marker(p);
}
void AnalogSignal::paint_grid(QPainter &p, int y, int left, int right)
{
p.setRenderHint(QPainter::Antialiasing, false);
- GlobalSettings settings;
- const bool show_analog_minor_grid =
- settings.value(GlobalSettings::Key_View_ShowAnalogMinorGrid).toBool();
-
if (pos_vdivs_ > 0) {
p.setPen(QPen(GridMajorColor, 1, Qt::DashLine));
for (int i = 1; i <= pos_vdivs_; i++) {
}
}
- if ((pos_vdivs_ > 0) && show_analog_minor_grid) {
+ if ((pos_vdivs_ > 0) && show_analog_minor_grid_) {
p.setPen(QPen(GridMinorColor, 1, Qt::DashLine));
for (int i = 0; i < pos_vdivs_; i++) {
const float dy = i * div_height_;
}
}
- if ((pos_vdivs_ > 0) && show_analog_minor_grid) {
+ if ((pos_vdivs_ > 0) && show_analog_minor_grid_) {
p.setPen(QPen(GridMinorColor, 1, Qt::DashLine));
for (int i = 0; i < neg_vdivs_; i++) {
const float dy = i * div_height_;
// Calculate and paint the sampling points if enabled and useful
GlobalSettings settings;
const bool show_sampling_points =
- (settings.value(GlobalSettings::Key_View_ShowSamplingPoints).toBool() ||
- paint_thr_dots) && (samples_per_pixel < 0.25);
+ (show_sampling_points_ || paint_thr_dots) && (samples_per_pixel < 0.25);
- p.setPen(base_->colour());
+ p.setPen(base_->color());
- const int64_t points_count = end - start;
+ const int64_t points_count = end - start + 1;
QPointF *points = new QPointF[points_count];
QPointF *point = points;
float *sample_block = new float[TracePaintBlockSize];
segment->get_samples(start, start + sample_count, sample_block);
+ if (show_hover_marker_)
+ reset_pixel_values();
+
const int w = 2;
- for (int64_t sample = start; sample != end; sample++, block_sample++) {
+ for (int64_t sample = start; sample <= end; sample++, block_sample++) {
+ // Fetch next block of samples if we finished the current one
if (block_sample == TracePaintBlockSize) {
block_sample = 0;
sample_count = min(points_count - sample, TracePaintBlockSize);
segment->get_samples(sample, sample + sample_count, sample_block);
}
- const float x = (sample / samples_per_pixel -
- pixels_offset) + left;
+ const float abs_x = sample / samples_per_pixel - pixels_offset;
+ const float x = left + abs_x;
*point++ = QPointF(x, y - sample_block[block_sample] * scale_);
+ // Generate the pixel<->value lookup table for the mouse hover
+ if (show_hover_marker_)
+ process_next_sample_value(abs_x, sample_block[block_sample]);
+
+ // Create the sampling points if needed
if (show_sampling_points) {
int idx = 0; // Neutral
if (show_sampling_points) {
if (paint_thr_dots) {
- p.setPen(SamplingPointColourNe);
+ p.setPen(SamplingPointColorNe);
p.drawRects(sampling_points[0].data(), sampling_points[0].size());
- p.setPen(SamplingPointColourLo);
+ p.setPen(SamplingPointColorLo);
p.drawRects(sampling_points[1].data(), sampling_points[1].size());
- p.setPen(SamplingPointColourHi);
+ p.setPen(SamplingPointColorHi);
p.drawRects(sampling_points[2].data(), sampling_points[2].size());
} else {
- p.setPen(SamplingPointColour);
+ p.setPen(SamplingPointColor);
p.drawRects(sampling_points[0].data(), sampling_points[0].size());
}
}
{
using pv::data::AnalogSegment;
+ // Note: Envelope painting currently doesn't generate a pixel<->value lookup table
+ if (show_hover_marker_)
+ reset_pixel_values();
+
AnalogSegment::EnvelopeSection e;
segment->get_envelope_section(e, start, end, samples_per_pixel);
return;
p.setPen(QPen(Qt::NoPen));
- p.setBrush(base_->colour());
+ p.setBrush(base_->color());
QRectF *const rects = new QRectF[e.length];
QRectF *rect = rects;
for (uint64_t sample = 0; sample < e.length - 1; sample++) {
const float x = ((e.scale * sample + e.start) /
samples_per_pixel - pixels_offset) + left;
- const AnalogSegment::EnvelopeSample *const s =
- e.samples + sample;
+
+ const AnalogSegment::EnvelopeSample *const s = e.samples + sample;
// We overlap this sample with the next so that vertical
// gaps do not appear during steep rising or falling edges
const int nh = min(neg_vdivs_, 1) * div_height_;
const float high_offset = y - ph + signal_margin + 0.5f;
const float low_offset = y + nh - signal_margin - 0.5f;
+ const float signal_height = low_offset - high_offset;
shared_ptr<pv::data::LogicSegment> segment = get_logic_segment_to_paint();
- if (!segment)
+ if (!segment || (segment->get_sample_count() == 0))
return;
double samplerate = segment->samplerate();
samples_per_pixel / LogicSignal::Oversampling, 0);
assert(edges.size() >= 2);
- // Check whether we need to paint the sampling points
- GlobalSettings settings;
- const bool show_sampling_points =
- settings.value(GlobalSettings::Key_View_ShowSamplingPoints).toBool() &&
- (samples_per_pixel < 0.25);
+ const float first_sample_x =
+ pp.left() + (edges.front().first / samples_per_pixel - pixels_offset);
+ const float last_sample_x =
+ pp.left() + (edges.back().first / samples_per_pixel - pixels_offset);
+ // Check whether we need to paint the sampling points
+ const bool show_sampling_points = show_sampling_points_ && (samples_per_pixel < 0.25);
vector<QRectF> sampling_points;
- float sampling_point_x = 0.0f;
+ float sampling_point_x = first_sample_x;
int64_t sampling_point_sample = start_sample;
const int w = 2;
- if (show_sampling_points) {
+ if (show_sampling_points)
sampling_points.reserve(end_sample - start_sample + 1);
- sampling_point_x = (edges.cbegin()->first / samples_per_pixel - pixels_offset) + pp.left();
- }
+
+ vector<QRectF> high_rects;
+ float rising_edge_x;
+ bool rising_edge_seen = false;
// Paint the edges
const unsigned int edge_count = edges.size() - 2;
QLineF *const edge_lines = new QLineF[edge_count];
line = edge_lines;
+ if (edges.front().second) {
+ // Beginning of trace is high
+ rising_edge_x = first_sample_x;
+ rising_edge_seen = true;
+ }
+
for (auto i = edges.cbegin() + 1; i != edges.cend() - 1; i++) {
- const float x = ((*i).first / samples_per_pixel -
- pixels_offset) + pp.left();
+ // Note: multiple edges occupying a single pixel are represented by an edge
+ // with undefined logic level. This means that only the first falling edge
+ // after a rising edge corresponds to said rising edge - and vice versa. If
+ // more edges with the same logic level follow, they denote multiple edges.
+
+ const float x = pp.left() + ((*i).first / samples_per_pixel - pixels_offset);
*line++ = QLineF(x, high_offset, x, low_offset);
+ if (fill_high_areas_) {
+ // Any edge terminates a high area
+ if (rising_edge_seen) {
+ const int width = x - rising_edge_x;
+ if (width > 0)
+ high_rects.emplace_back(rising_edge_x, high_offset,
+ width, signal_height);
+ rising_edge_seen = false;
+ }
+
+ // Only rising edges start high areas
+ if ((*i).second) {
+ rising_edge_x = x;
+ rising_edge_seen = true;
+ }
+ }
+
if (show_sampling_points)
while (sampling_point_sample < (*i).first) {
const float y = (*i).second ? low_offset : high_offset;
sampling_point_x += pixels_per_sample;
};
- p.setPen(LogicSignal::EdgeColour);
+ if (fill_high_areas_) {
+ // Add last high rectangle if the signal is still high at the end of the trace
+ if (rising_edge_seen && (edges.cend() - 1)->second)
+ high_rects.emplace_back(rising_edge_x, high_offset,
+ last_sample_x - rising_edge_x, signal_height);
+
+ p.setPen(high_fill_color_);
+ p.setBrush(high_fill_color_);
+ p.drawRects((const QRectF*)(high_rects.data()), high_rects.size());
+ }
+
+ p.setPen(LogicSignal::EdgeColor);
p.drawLines(edge_lines, edge_count);
delete[] edge_lines;
const unsigned int max_cap_line_count = edges.size();
QLineF *const cap_lines = new QLineF[max_cap_line_count];
- p.setPen(LogicSignal::HighColour);
+ p.setPen(LogicSignal::HighColor);
paint_logic_caps(p, cap_lines, edges, true, samples_per_pixel,
pixels_offset, pp.left(), high_offset);
- p.setPen(LogicSignal::LowColour);
+ p.setPen(LogicSignal::LowColor);
paint_logic_caps(p, cap_lines, edges, false, samples_per_pixel,
pixels_offset, pp.left(), low_offset);
// Paint the sampling points
if (show_sampling_points) {
- p.setPen(SamplingPointColour);
+ p.setPen(SamplingPointColor);
p.drawRects(sampling_points.data(), sampling_points.size());
}
}
(segment_display_mode_ == ShowLastCompleteSegmentOnly)) {
try {
segment = segments.at(current_segment_);
- } catch (out_of_range) {
+ } catch (out_of_range&) {
qDebug() << "Current analog segment out of range for signal" << base_->name() << ":" << current_segment_;
}
}
(segment_display_mode_ == ShowLastCompleteSegmentOnly)) {
try {
segment = segments.at(current_segment_);
- } catch (out_of_range) {
+ } catch (out_of_range&) {
qDebug() << "Current logic segment out of range for signal" << base_->name() << ":" << current_segment_;
}
}
conv_threshold_cb_->blockSignals(true);
// Set available options depending on chosen conversion
- for (pair<QString, int> preset : presets)
+ for (pair<QString, int>& preset : presets)
conv_threshold_cb_->addItem(preset.first, preset.second);
map < QString, QVariant > options = base_->get_conversion_options();
conv_threshold_cb_->blockSignals(false);
}
+vector<data::LogicSegment::EdgePair> AnalogSignal::get_nearest_level_changes(uint64_t sample_pos)
+{
+ assert(base_);
+ assert(owner_);
+
+ // Return if there's no logic data or we're showing only the analog trace
+ if (!base_->logic_data() || (display_type_ == DisplayAnalog))
+ return vector<data::LogicSegment::EdgePair>();
+
+ if (sample_pos == 0)
+ return vector<LogicSegment::EdgePair>();
+
+ shared_ptr<LogicSegment> segment = get_logic_segment_to_paint();
+ if (!segment || (segment->get_sample_count() == 0))
+ return vector<LogicSegment::EdgePair>();
+
+ const View *view = owner_->view();
+ assert(view);
+ const double samples_per_pixel = base_->get_samplerate() * view->scale();
+
+ vector<LogicSegment::EdgePair> edges;
+
+ segment->get_surrounding_edges(edges, sample_pos,
+ samples_per_pixel / LogicSignal::Oversampling, 0);
+
+ if (edges.empty())
+ return vector<LogicSegment::EdgePair>();
+
+ return edges;
+}
+
void AnalogSignal::perform_autoranging(bool keep_divs, bool force_update)
{
const deque< shared_ptr<pv::data::AnalogSegment> > &segments =
static double prev_min = 0, prev_max = 0;
double min = 0, max = 0;
- for (shared_ptr<pv::data::AnalogSegment> segment : segments) {
+ for (const shared_ptr<pv::data::AnalogSegment>& segment : segments) {
pair<double, double> mm = segment->get_min_max();
min = std::min(min, mm.first);
max = std::max(max, mm.second);
update_scale();
}
+void AnalogSignal::reset_pixel_values()
+{
+ value_at_pixel_pos_.clear();
+ current_pixel_pos_ = -1;
+ prev_value_at_pixel_ = std::numeric_limits<float>::quiet_NaN();
+}
+
+void AnalogSignal::process_next_sample_value(float x, float value)
+{
+ // Note: NAN is used to indicate the non-existance of a value at this pixel
+
+ if (std::isnan(prev_value_at_pixel_)) {
+ if (x < 0) {
+ min_value_at_pixel_ = value;
+ max_value_at_pixel_ = value;
+ prev_value_at_pixel_ = value;
+ current_pixel_pos_ = x;
+ } else
+ prev_value_at_pixel_ = std::numeric_limits<float>::quiet_NaN();
+ }
+
+ const int pixel_pos = (int)(x + 0.5);
+
+ if (pixel_pos > current_pixel_pos_) {
+ if (pixel_pos - current_pixel_pos_ == 1) {
+ if (std::isnan(prev_value_at_pixel_)) {
+ value_at_pixel_pos_.push_back(prev_value_at_pixel_);
+ } else {
+ // Average the min/max range to create one value for the previous pixel
+ const float avg = (min_value_at_pixel_ + max_value_at_pixel_) / 2;
+ value_at_pixel_pos_.push_back(avg);
+ }
+ } else {
+ // Interpolate values to create values for the intermediate pixels
+ const float start_value = prev_value_at_pixel_;
+ const float end_value = value;
+ const int steps = fabs(pixel_pos - current_pixel_pos_);
+ const double gradient = (end_value - start_value) / steps;
+ for (int i = 0; i < steps; i++) {
+ if (current_pixel_pos_ + i < 0)
+ continue;
+ value_at_pixel_pos_.push_back(start_value + i * gradient);
+ }
+ }
+
+ min_value_at_pixel_ = value;
+ max_value_at_pixel_ = value;
+ prev_value_at_pixel_ = value;
+ current_pixel_pos_ = pixel_pos;
+ } else {
+ // Another sample for the same pixel
+ if (value < min_value_at_pixel_)
+ min_value_at_pixel_ = value;
+ if (value > max_value_at_pixel_)
+ max_value_at_pixel_ = value;
+ }
+}
+
void AnalogSignal::populate_popup_form(QWidget *parent, QFormLayout *form)
{
// Add the standard options
connect(conv_threshold_cb_, SIGNAL(currentIndexChanged(int)),
this, SLOT(on_conv_threshold_changed(int)));
- connect(conv_threshold_cb_, SIGNAL(editTextChanged(const QString)),
+ connect(conv_threshold_cb_, SIGNAL(editTextChanged(const QString&)),
this, SLOT(on_conv_threshold_changed())); // index will be -1
// Add the display type dropdown
form->addRow(layout);
}
+void AnalogSignal::hover_point_changed(const QPoint &hp)
+{
+ Signal::hover_point_changed(hp);
+
+ // Note: Even though the view area begins at 0, we exclude 0 because
+ // that's also the value given when the cursor is over the header to the
+ // left of the trace paint area
+ if (hp.x() <= 0) {
+ value_at_hover_pos_ = std::numeric_limits<float>::quiet_NaN();
+ } else {
+ try {
+ value_at_hover_pos_ = value_at_pixel_pos_.at(hp.x());
+ } catch (out_of_range&) {
+ value_at_hover_pos_ = std::numeric_limits<float>::quiet_NaN();
+ }
+ }
+}
+
+void AnalogSignal::on_setting_changed(const QString &key, const QVariant &value)
+{
+ Signal::on_setting_changed(key, value);
+
+ if (key == GlobalSettings::Key_View_ShowSamplingPoints)
+ show_sampling_points_ = value.toBool();
+
+ if (key == GlobalSettings::Key_View_FillSignalHighAreas)
+ fill_high_areas_ = value.toBool();
+
+ if (key == GlobalSettings::Key_View_FillSignalHighAreaColor)
+ high_fill_color_ = QColor::fromRgba(value.value<uint32_t>());
+
+ if (key == GlobalSettings::Key_View_ShowAnalogMinorGrid)
+ show_analog_minor_grid_ = value.toBool();
+
+ if (key == GlobalSettings::Key_View_ConversionThresholdDispMode) {
+ conversion_threshold_disp_mode_ = value.toInt();
+
+ if (owner_)
+ owner_->row_item_appearance_changed(false, true);
+ }
+}
+
void AnalogSignal::on_min_max_changed(float min, float max)
{
(void)min;
owner_->row_item_appearance_changed(false, true);
}
-void AnalogSignal::on_settingViewConversionThresholdDispMode_changed(const QVariant new_value)
-{
- conversion_threshold_disp_mode_ = new_value.toInt();
-
- if (owner_)
- owner_->row_item_appearance_changed(false, true);
-}
-
} // namespace trace
} // namespace views
} // namespace pv